SBO on Indoor IR Heating Network

Replacement lamp for SIDEL SBO Series 2

Wed, 22 Jul 2026 06:33:56 +0800

Getting More Out of Your SBO Series 2

If you’re running an older SBO Series 2, you’ve probably noticed the cycle times starting to drag. It happens. As those heating elements age, they just don’t hit like they used to. The good news? You don’t have to rip out the whole oven to get your speed back. Usually, just swapping in some high-density infrared lamps does the trick. The deal with heat density Here’s how it works: the SBO Series 2 uses short-wave infrared to get into those PET preforms. We’ve built our replacement lamps to fit the original Sidel specs perfectly—same voltage, same wattage footprint. But by using a higher wattage tube, you’re basically packing more heat into every square centimeter. It gets the preform to that “sweet spot” (the glass transition temperature) a lot faster. One heads-up, though. More power means more heat around the lamp holders. If your cooling blowers are clogged with dust or just dying, these high-output lamps will burn out way too quickly. Give your fans a look before you swap the bulbs. The nitty-gritty on the build We use heavy-wall quartz glass because it doesn’t bow or warp when things get hot. Plus, the filaments are halogen-filled. That keeps the light output steady for thousands of hours so you aren’t constantly tweaking your settings. As for the fit? It’s a drop-in. We use standard R7s or SK15 connectors, so you won’t be spending your afternoon rewiring the machine or messing with brackets. They sit flush in the reflector, which means the heat goes exactly where it should: straight into the preform. What this actually does for your floor Old, dim lamps lead to “cold spots.” When the heat isn’t even, you get thin walls in your bottles and a mountain of scrap. It’s frustrating. Fresh lamps give you a uniform thermal field. You can push the machine faster and still trust that every bottle coming off the line is consistent. If the oven is the bottleneck holding back your entire production line, this is the easiest way to squeeze more bottles per hour out of an old workhorse.

Sidel SBO replacement bulb 380V

Sat, 18 Jul 2026 05:51:13 +0800

Getting Your Sidel SBO Heat Back on Track: The 380V Lamp Story

When you’re running PET blow molding, a “working” bulb isn’t actually enough. You need consistency. If the heat fluctuates even a little, you’re in trouble. That’s why we built our 380V replacement lamps. We wanted something that just drops right into Sidel SBO machines—and other global setups—without you having to mess around with the wiring. The deal with 380V heating Most IR lamps run on lower voltages. But Sidel SBO systems are different; they need 380V to keep the wattage steady across those long quartz tubes. To make that happen, we used a high-tension tungsten filament. It hits the exact heat density needed to get the PET preform to that sweet spot—the glass transition temperature—right before it hits the mold. If the voltage dips or the wattage is slightly off, you’ll start seeing “pearling” or weirdly thin walls in your bottles. Nobody wants that. Built to fit, built to last We went with heavy-wall quartz glass. Why? Because extreme heat makes cheap glass bow, and that ruins everything. The ends use standard R7s or SK15 connectors, and the footprint is a mirror image of the OEM specs. You can swap these out during a scheduled stop and be back up and running in minutes. No rewiring. No headaches. Plus, we added a short-wave coating to the quartz. Instead of wasting energy heating up the oven walls, the infrared energy goes straight into the plastic. It’s just smarter. A few real-world tips These lamps put out a massive amount of heat. Because of that, you’ve got to keep your reflectors polished and clean. If the reflector is dirty, the lamp overheats and the filament burns out way too fast. We’ve seen plenty of lamps die early simply because the oven’s cooling fans were clogged with dust. Keep the airflow clear, and your lamps will last a lot longer. Simple as that.

Sidel SBO 24 Series 2 infrared radiator

Mon, 06 Jul 2026 12:03:29 +0800

Sidel SBO 24 Series 2 Infrared Radiator: The Drop-in Workhorse That Just Fits

Let’s cut to the chase. If you’re running a Sidel line—older SBO machines or the newer Matrix models—this infrared radiator is built to drop right in and get the job done. No messing around with rewiring panels or reworking mounts. We built it to end the headache of running mixed equipment. You plug it in, and it works. Plain and simple.